71 GMC swb

harleyman4 · #1 (**permalink**) 02-28-2013, 05:42 AM

does anyone know the proper positioning of the lower A-Frame on my k member?

gearheadslife · #2 (**permalink**) 02-28-2013, 07:43 AM

Quote:

Originally Posted by harleyman4

does anyone know the proper positioning of the lower A-Frame on my k member?

the engine crossmeber bolts in.. if it was removed at some point..
just line up the holes.. mine (71c-10) is still rivited but there is only one way for it to go. and line up

harleyman4 · #3 (**permalink**) 02-28-2013, 08:01 AM

Quote:

Originally Posted by gearheadslife

the engine crossmeber bolts in.. if it was removed at some point..
just line up the holes.. mine (71c-10) is still rivited but there is only one way for it to go. and line up

I re-installed the crossmember, but the question i have is about the lower A-Frame (with the 2 u-bolts) of what the positioning is for the alignment, do you know the specs for that is?

gearheadslife · #4 (**permalink**) 02-28-2013, 09:20 AM

Quote:

Originally Posted by harleyman4

I re-installed the crossmember, but the question i have is about the lower A-Frame (with the 2 u-bolts) of what the positioning is for the alignment, do you know the specs for that is?

the lowers are not adjustable.. the u bolts hold the shaft to the k member..
all alignment is done at the upper a arm.. the lower a arm is fixed points..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cracked dash 95 chevy swb	bbc68	Interior	4	07-20-2011 10:57 AM
swb truck	travis wilson	Introduce Yourself	2	06-23-2007 12:13 PM
How's this combo for a 77 swb chevy PU.	Streetmaster	Engine	1	07-29-2005 07:14 PM
need help with a 63 C10 SWB	mondo23	Hotrodding Basics	8	07-24-2005 09:31 PM

The Following User Says Thank You to gearheadslife For This Useful Post:
harleyman4 (02-28-2013)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)