72 Nova Restoration
Hi everyone I'm rebuilding a 72 Nova but I've gotten to a point that I don't know what needs to be done next.Here's what I've done ( Trunk pan,both quarter panels,outer wheel wells,floor pans,toe boards,the sheet metal between the trunk and the rear window.I also had the replace a lot of sheet metal around front and back window.I have cleaned and sanded the underside and the inside.I have sand blasted all hard it get to places.The car is on a Rotisserie now.The car has a full 10 pt cage that I plan on keeping in the car and it needs sanding and painting.I'm at a point that I just don't know what needs to be done next.Here's a few pics.All sheet metal has been welded.
My next step would be to put the body back on the frame and reinstall the fenders doors hood trunk and start getting the body straight
|All times are GMT -6. The time now is 04:44 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.