Hot Rod Forum banner

72 Nova Restoration

4K views 1 reply 2 participants last post by  Rag top bird 
#1 ·
Hi everyone I'm rebuilding a 72 Nova but I've gotten to a point that I don't know what needs to be done next.Here's what I've done ( Trunk pan,both quarter panels,outer wheel wells,floor pans,toe boards,the sheet metal between the trunk and the rear window.I also had the replace a lot of sheet metal around front and back window.I have cleaned and sanded the underside and the inside.I have sand blasted all hard it get to places.The car is on a Rotisserie now.The car has a full 10 pt cage that I plan on keeping in the car and it needs sanding and painting.I'm at a point that I just don't know what needs to be done next.Here's a few pics.All sheet metal has been welded.








 
See less See more
5
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top