Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - '76 sbc build , need more head advice
View Single Post
  #5 (permalink)  
Old 03-10-2008, 09:19 PM
TheCiscoKid TheCiscoKid is offline

Last journal entry: dash mods
Last photo:
Join Date: Aug 2004
Location: Picton,Ont,Canada
Age: 66
Posts: 189
Wiki Edits: 0

Thanks: 2
Thanked 0 Times in 0 Posts
'76 sbc build , need more head advice

Sorry ,I took awhile to borrow a compression tester.I just took readings, and put the car back together,what a pain getting plugs back in.It's fricking freezing in the garage too, -30 outside.Now I re-read the instructions posted here on how to do it.Sorry,I did not warm up the car, been sitting for months, didn't open the trottle.The compresion was 80 -85 on 6 cylinders, maybe 65 lbs on 2.
My cam is a Summit 1102, same as performer.I don't have an adjustable timing chain.I've been looking a heads and mine are 487, large chamber but should be a good head. Cisco
Reply With Quote