Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - '76 sbc build , need more head advice
View Single Post
  #43 (permalink)  
Old 03-27-2008, 05:22 PM
TheCiscoKid TheCiscoKid is offline

Last journal entry: dash mods
Last photo:
Join Date: Aug 2004
Location: Picton,Ont,Canada
Age: 66
Posts: 189
Wiki Edits: 0

Thanks: 2
Thanked 0 Times in 0 Posts
'76 sbc build , need more head advice

I have a Performer intake and a 4 hole, 1'' 'torque swirl' spacer, supposed to add bottom end, but it keeps the air cleaner clear of distributor and rad hose, and helps fill the compartment up.I was thinking about taking it out and see if it makes any dif.I also have to put in the advance kit.The distributor is a ProForm Ebay thing I bought, because the cap alone here is more expensive than the whole distributor kit price and my GM distb diasappered.
1 5/8 shorty headers, 2'' exhaust.
thanks for info Red, just don't hit me with your purse. :o)
Hey 400, I asked around ,machining is 1300 to 1700,plus assembly,balancing plus parts will put it up.Think we'll ever get warm weather? When I took the dog out this morning I saw 2 geese flying south and I'm sure that honking was saying F* this.
Peace, out. .V.. Cisco

Last edited by TheCiscoKid; 03-27-2008 at 05:36 PM.
Reply With Quote