'93 ford tempo won't start. Need help pulling codes
I know it's not my hotrod, but I need help getting the old daily driver to start.
I have a 1993 Ford Tempo. 4cyl fuel injected. Last weekend I didn't drive the car for 3 days, and we had freezing weather. I can not get it to start now.
First thing I did this morning was replace the battery and terminal ends because it was a mess. Car still will not start. It acts as if it's not getting gas.
I found a site that shows me how to pull the codes, but I can't find the STI connector. I found the 6 pin Data link connector that says EEC TEST on the cover, but I can't find the STI connector that a run a jumper wire to.
Any help is appreciated.
Last edited by RodFather; 01-20-2007 at 02:29 PM.