[Billz428]

What is out for this engine,what is possible with the factory fuel injection system? This is in a 4wheel drive ext cab truck. 93000 miles,just looking for some extra power, I have duel ext right now 2 1/4 pipes 3.73 rear gears. Any info would be great.

[Billz428]

BUMP!

[richard stewart 3rd]

Hi,
You might try a computer/programmer if you just want a little more power

[Billz428]

I,m planning on an Air intake,programmer,headers,better ingition what of an increase will this give me any idea?

[Vortech 4.3]

http://www.fullsizechevy.com/forums/

read a lot, before posting.

[Billz428]

Hey Thanx for the Web Site, I,m sure it help ,what I can live without is the smartA## attitude,I may not have the time and convenience of poring thru books and web sites, I was looking for some friendly advice, O CHEVY MASTER, that is what a site like is for, an exchange of ideas and information.

[Vortech 4.3]

Originally Posted by Billz428

what I can live without is the smartA## attitude,I may not have the time and convenience of poring thru books and web sites,

is that directed at me ?

[Billz428]

Originally Posted by Vortech 4.3

is that directed at me ?

I thought that was the intent, I mean what level of training,education, should one have till you are able to post on this site?How long do you read and study? How would one learn of other people ideas and experiences if you never ask a Question by posting on this site. Again,Thanx for the site it has been really helpful and informed me of whar I need to know.

[Vortech 4.3]

Originally Posted by Billz428

I thought that was the intent, I mean what level of training,education, should one have till you are able to post on this site?

How long do you read and study?

How would one learn of other people ideas and experiences if you never ask a Question by posting on this site.

Again,Thanx for the site it has been really helpful and informed me of whar I need to know.

should be more than what you have.

a lot.

by READING. since you don't do this(because you THINK your special), you haved missed that your question has been answered 1000 times allready. so people of KNOWLEDGE, such as myself, get tierd of replying to those same questions.

sorry i gave you that www. sometimes i hate trying to help.

now. go ask about your CIA's, TBS's, tornados, and cat backs. me, i have to go pull my trans(that still works). so "I" can build it into a 4L70E to handle the well over 400hp my 4.3 is putting out.

btw, have a crappy day

[firestone]

I dont know if you wanted to go this far, but I think a little larger cam than stock would make a noticeable difference.

Adam

[jimfulco]

Might also ask at www.67-72chevytrucks.com/vboard . They have forums for later-model trucks, also.

[Billz428]

Thanks for the reply`s guys ,the site given to me by Vortec 4.3 more than answered my questions, lots of good info and stupid me never even had to post or bother some highly trained very important chevy master.

[Vortech 4.3]

fullsizechevy.com, full of "highly trained very important chevy master"s ?

BuWaHahahahahahahaaaaaaa. that job goes to this web site.
though there are a few KNOWLEDGABLE guys over there.


my little V6, as you put it in your PM to me. will stomp anything you ever have. and i love stomping many V8's that are around my area (suburban chicago, not podunk alaska). just makes it that much sweeter. anybody can build a V8, big deal.


i am finished talking with you. you are ignorant. and after all this, you took the advise that you bashed me for

his PM to me.

Originally Posted by Billz428

I did read quite a bit before I posted , your answer was to vague in it`s intent. Should I read more here or there. Does it really matter? If you want to help folks leave some more info for them to read. I have a bit more experience than I let on also,those little bolt on doodads are worthless! I was in search of a quick easy answer to a goal with a still emission and ease of install ,not a full blown rebuild with super trick parts. SO IF YOU GOT YOUR FEELINGS HURT I don`t really care ,so go **** your self, you spent all the time and effort money on a little V6,had the same same efforts been done to a V8 then you might have something, V6 only get you a weight savings in a little truck. A midget with muscles!

this is what i get for helping

[Billz428]

I did not bash you for the site you directed me to,it was for assuming that I was wasting people`s time and board space. That is a great site just like this one ,but how you answered me was a little short,I would have never bashed your efforts till you threw rocks at me in your third post. I never even made mention of your town either, Alaska is a great place to live but it is not for everyone.Also I am a very different type of person hardly ignornant at all.

[Bumpstick]

I`m no modd but hey PM`s mean Private Messages so lets keep them to ourselves and just help each other hummm...?

With ever changing tech and new toys and gagets I came into this post to see if anything new in the way of parts or idea`s was on the block...? Boy did I get a surprise...?

Also everyone has their own idea about hotrodding so live and let live k...


Billz428... I think there are some different cams out there now but of course spring changes will have to be done also... Exhaust is a big help too with good headers and system to match... A programer will only do so much to those engines but with other add on`s it will be needed for sure...