[subman17]

I am going to be installing a B&M 250 supercharger on my 69 chevy C-10 pick up. The problem I have is the long water pump, and stock ps pump and alternator. I need to switch to a short water pump, and relocate the ps and alt closer to the motor in order to get them to drive off of a 2 groove crank pulley. Does anyone make a kit to move these accessories so they clear the supercharger drive belt? I dont wanna break the bank on this. Thanks!

[Marcus]

I've got the same basic problem with my B&M supercharger...I decided to mount the alternator off the drivers side cylinder head, pretty high up and then mount the power steering pump below it using a kit I ordered on line. There are a lot of options for mounting these two items. You are going to have to experiment a little to get it right. I had to return a couple of mounting brackets before I got it right.