|
|
|
05-06-2009, 02:51 PM
|
|||||
|
|||||
|
adjustable vacuum advance
can you explain to me why when you turn the set screw in the vacuum cannister counter clock wise it adds less advance and when you turn the screw clockwise it adds more advance? i picture it as when you tighten the screw it increases the spring tension and you need more vacuum to open it. right?
|
|
05-06-2009, 03:05 PM
|
|||||
|
|||||
|
Yes, you are correct.
|
|
05-06-2009, 03:16 PM
|
|||||
|
|||||
|
according to moroso and mr gasket you turn the screw counter clockwise for less advance and clockwise for more advance. doesnt make sense to me.
|
|
05-06-2009, 04:43 PM
|
||||
|
||||
|
Screw is the stop when crank it out the vacuum advance can't travel as far.
|
|
05-06-2009, 04:54 PM
|
|||||
|
|||||
|
so the screw has nothing to do with the spring?
|
|
05-06-2009, 11:10 PM
|
||||
|
||||
|
Some dodges and maybe others screw adjust spring pressure
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| terrible gas milage help!! | hddave1 | Engine | 124 | 03-31-2008 10:57 AM |
| running no vacuum advance | oregon chevelle | Engine | 30 | 02-07-2007 07:17 PM |
| ignition timing | bad502 | Engine | 21 | 02-20-2006 06:57 PM |
| mechanical advance settings?? | Lthompson | Electrical | 10 | 02-10-2005 03:19 PM |
| Vacuum Advance/ timing confusion! | Zeder | Engine | 4 | 07-11-2003 02:25 AM |
