Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Adler 67 questions "I enter with respect"
View Single Post
  #4 (permalink)  
Old 12-01-2012, 06:36 AM
DanTwoLakes's Avatar
DanTwoLakes DanTwoLakes is online now Moderator
Last wiki edit: Contact adhesive
Last journal entry: 49 Packard
Last photo:
Join Date: Apr 2006
Location: Lake Tomahawk, Wisconsin
Age: 65
Posts: 6,330
Wiki Edits: 22

Thanks: 0
Thanked 281 Times in 244 Posts
Number 1 is the inside half of a piping foot, I think. I don't know what number 2 is, number 3 I thought was a binding or edging attachment which would attach to the bed of the machine. You would then feed the edge of the fabric you are sewing into this attachment and the attachment would fold it over as it is sewed. This would normally be used for the edges of things like boat covers. Now I'm not sure what it is either. Number 4 is the outside half of a topstitch foot. The rotating guard sits next to fabric that is doubled over, and keeps the foot at the proper distance to topstitch the piece of folded fabric the same distance from the outside edge of the fabric.

No one lives forever, the trick is creating something that will.
Reply With Quote