Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - advice needed to improve mig weld
View Single Post
  #4 (permalink)  
Old 11-27-2004, 07:41 PM
adtkart adtkart is offline
adtkart@aol.com
 
Last photo:
Join Date: Oct 2002
Location: Newport News, VA
Posts: 3,220
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
You might also look inside the nozzle for buildup. At work, the guys always screw them up and they get plugged up inside. That reduces the gas flow, and causes considerable splatter.
Reply With Quote