Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Air Bag Suspension
View Single Post
  #1 (permalink)  
Old 06-30-2012, 04:17 PM
27Tall T 27Tall T is offline
Registered User
 
Last photo:
Join Date: Oct 2010
Location: British Columbia
Posts: 286
Wiki Edits: 0

Thanks: 252
Thanked 11 Times in 11 Posts
Air Bag Suspension

I have a air bag system in my Ford snub nose and have noticed something odd. When I load up the bags I notice that the front air bags are not the same height (the rubber stops are where I take the measurement). One is actually about 3/4"-1" higher than the other. The system has no solenoids or special switches other than a paddle switch for the rear and a paddle for the front. A line goes to the front cross member and is then "T'd" to both bags (one line being longer than the other). This means that the pressure should be the same in both bags because of the common line. What's also head scratching is that the bag furthest away from the paddle switch (longer line) is the higher bag. I haven't put the snub nose on the road as yet until I find out what's going on. Any insight would be greatly appreciated.
Reply With Quote