Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Aluminum Heads for Mild 327?
Thread: Aluminum Heads for Mild 327?
View Single Post
  #1 (permalink)  
Old 08-12-2012, 02:31 PM
sscamaro_510's Avatar
sscamaro_510 sscamaro_510 is offline
Member
  
Last photo:
Join Date: Jul 2004
Location: Bay Area,CA
Age: 26
Posts: 62
Wiki Edits: 0

Thanks: 2
Thanked 0 Times in 0 Posts
Aluminum Heads for Mild 327?
I am trying to decide between the Edelbrock E-Streets,Performer's and the AFR 180 Eliminator's all in the 64cc range with 180cc runners. These new heads are going to sit on top of the original 327ci. / 210 HP in my 68 RS Camaro that need's to be re-built,bear in mind it's gonna be a Semi Daily Driver,I'm looking for a mild small block(345-380HP) with a little lump to it...the car already has headers,HEI distributor and a Edelbrock Performer 2101 intake and Edelbrock 600cfm Manual choke carb that I was gonna use,maybe upgrade the headers actually. The stock 2-Speed Powerglide and i'm assuming the stock gears in the rear end are still in the car,any recommendations to wake the car up? Thanks for the help.

Carlos
Reply With Quote