hi ive read quite a few diffrent versions of 406s that people have posted and i had a few questions about building my own so any help would be great and thx in advance.
heres what i have
and a set of protopline 235/72cc chambers
10 degree moly retainers, #614-16 10 degree valve locks, #98643 .750 lift Congo roller springs, stainless one-piece chrome stem racing valves, guide plates, 3/8 or 7/16 ARP studs, #SC531 VTO seals.
forged mahle 11 cc dome pistons
i was wondering what cam should i run
am i calculating correct to 13.1 compression
could i run this on e-85