Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Another blower question
View Single Post
  #2 (permalink)  
Old 01-21-2013, 03:45 PM
496CHEVY3100's Avatar
496CHEVY3100 496CHEVY3100 is online now
Built Not Bought

Last journal entry: 53 ad3100
Last photo:
Join Date: Jul 2012
Location: Appalachia GA
Posts: 1,002
Wiki Edits: 0

Thanks: 1,752
Thanked 1,114 Times in 769 Posts
On a street engine you will need the steam holes drilled in heads you are using,you can get by on engines no turning Less than around 3000 rpm such as circle track ,we ran Late Model Modified on dirt with alumimum block and Brodix # 7 heads prepared by Race Engine Design .we drilled heads just to be sure,some did not,but some had problems in pack out and during caution,I am assuming you will need all the help you can get to cool blown engine, I have built hundred or so racing engines But Never a blown engine ,will be building BBC with 671 crager blower later this year ,Just my opinion someelse might help us both ,Good luck

Last edited by 496CHEVY3100; 01-21-2013 at 03:51 PM.
Reply With Quote