Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - another vortec question
View Single Post
  #21 (permalink)  
Old 11-15-2012, 11:41 AM
engineczar's Avatar
engineczar engineczar is online now
Hotrodders.com Moderator
 
Last photo:
Join Date: Sep 2002
Location: In Flowbench nirvana
Age: 51
Posts: 1,591
Wiki Edits: 0

Thanks: 3
Thanked 33 Times in 30 Posts
Quote:
Originally Posted by MouseFink View Post
Show me a valve spring that has 350 lb.open pressure and can be fitted at 1.750" and is 1.250" OD. You cannot can you. That blows you theory into the weeds.

Howards 98215, I use them all the time.


98215 Single with Damper 1.265 dia 115 @ 1.800 380 @ 1.200

@1.75 you have about 135#'s on the seat which works well for a solid flat tappet


There's also PAC1409's and Isky's 295D

All standard Stock Eliminator stuff.

At one point we were running 180# on the seat with Schubecks but we've backed off some.
__________________
BSE Racing Engines

Last edited by engineczar; 11-15-2012 at 11:56 AM.
Reply With Quote