![]() |
|
|
|
||||
|
I'm trying to figure out what the specs are on this cam, but I can't seem to find it anywhere. Apparently I'm not looking in the right place, as I'm a believer that the info I seek is out there somewhere... a link or response with the info would be greatly appreciated!
|
|
|||||
|
1973 302 2V Cam Timing Specs
Lobe Lift INT 0.2303 EXH 0.2375 Theoretical Valve Lift INT 0.3707 EXH 0.3823 She's a real killer, isn't she?
|
|
||||
You're kidding, right?
|
|
|||||
|
[quote]Originally posted by 66StangBoy:
<strong> You're kidding, right? </strong><hr></blockquote>Nope! Remember...this is right in the middle of the era all manufacturers had to comply with strict emmission requirements. On top of this ...the cam was run retarded. |
|
|||||
|
Yeah...most don't remember...but FORD went through some hard times (well, they all did) during this period.
With the introduction of the PINTO came the flood of imports. Sitting in gas lines was no picnic. |
|
||||
|
I rarely think about that, as it all happened before I was around (though not by much).
|
|
||||||
|
Hey KULTULZ, I remember in Jersey we had odd/even gas days. If your license plate ended with an odd number you could only get gas on odd numbered days. God forbid your plate ended in a 3 and you were running out of gas on the 12th, oops had to wait a day.
|
|
|||||
|
I managed a SHELL station during the first one and knew somebody the second go around...
|
|
|
| Recent Engine posts with photos |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|