Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - attention machinists...need opinions on cyl head repair
View Single Post
  #7 (permalink)  
Old 04-17-2006, 09:43 PM
cliff tate cliff tate is offline
Member
 
Last photo:
Join Date: Aug 2003
Location: surrey bc canada
Age: 74
Posts: 646
Wiki Edits: 0

Thanks: 0
Thanked 10 Times in 10 Posts
welding heads

Quote:
Originally Posted by ratlover
It is a cast iron head. As a welder I am always a little leary of welding cast iron. The heat control is so essential to a successful repair with no future stress or cracks showing up. These days hard to find anyone who can make a living at it. Just wondering if you have any experience with these pins.
the type of welding i refered to theygrind the cracks out toatly heat the head red hot then gas weldthe cracks cool the head for at least 24 hrs re machine inst new inserts and guides. this proses has been around for many years for heavey duty diesel engines and worked very well. the cat dealer i worked for used thes headsextensively with good reults. head hunters was 1 co edc anothercliff
Reply With Quote