Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (
-   Suspension - Brakes - Steering (
-   -   austin fever (

low tin 10-26-2012 10:52 PM

austin fever
I am putting an austin with a 350sm together I am working on the steering colum to rack&pinion set up looks like I need four u joimts one at each end & two in the middle any ideas how to set this up

327NUT 10-27-2012 07:56 PM

W/o but you'll have to have bearing supports along the steering shaft to maintain rigidity, can't and won't work w/o them.

sedanbob 10-27-2012 10:31 PM

3 Attachment(s)
I had to route my steering around the headers on my sbc - I ended up with 3 u-joints, so I had to add a support bearing. Maybe these pics will help you figure yours out.

All times are GMT -6. The time now is 12:02 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999 - 2012. All Rights Reserved.