|
|
|
02-02-2013, 04:12 PM
|
|||||
|
|||||
|
Autolite 4100
I just got 6 autolite 4100 4v carburetors.Most are complete and some are missing some small parts.But i think i have enough parts to end up with 2 maybe 3 good rebuilt carbs.I went to a few local parts stores,NAPA,Pep Boys,VIP to get a couple of rebuild kits..but im not liking what i see in the box..there are a few gaskets and almost no hard parts.Not a good start for carbs that need more than the slim offerings i found.Where can i find a good rebuild kit with nearly every moving part i need to rebuild the carbs?
|
|
02-02-2013, 04:19 PM
|
|||||
|
|||||
|
i also noticed that 2 carbs have larger 'snouts' than the other 4 carbs,which have smaller 'snouts' why the difference? The large snouts came from a 66 390 and the other came from a 67 390 big block
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Autolite 4100 Rebuild - Help! | sixty9santa | Engine | 6 | 02-03-2013 09:32 AM |
| swapping out a 4100 | cedd | Hotrodding Basics | 2 | 01-26-2012 09:35 PM |
| 4100 carb | Bad Bob | Hotrodders Site Suggestions and Help | 2 | 03-28-2007 05:02 PM |
| Ford Autolite 4100 jets? | 62galaxiguy | Engine | 6 | 01-17-2007 06:11 AM |
| autolite 4100 rebuild | 62galaxiguy | Engine | 13 | 03-18-2004 12:23 PM |
