Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - basic air line setup with drawings
View Single Post
  #1 (permalink)  
Old 10-04-2006, 11:04 PM
robs ss robs ss is offline
Registered User
 
Join Date: Sep 2005
Location: Two Rivers Wi.
Age: 72
Posts: 451
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
basic air line setup with drawings

Air line- compressor set up drawings

I was on another forum, the camaro forum about air lines and compressors,( body shop), (buying an air compressor, basic questions), and I noticed it has over 1600 views in 12 days, so that leads me to believe that there is a little confusion about how to run air lines. I made a couple of drawings for a basic setup that works without airdryers and all the extra hoopla that you usually see on a commercial airline setup drawing.

There is one setup going over overhead doors, and one for a basic 8 foot side wall garage, thought you might want to look at it.

Drawings are crude, but this type of layout works, anyway heres the thread.

Buying an air compressor, basic questions. ( 1 2 3 4 5 ... Last Page)

I didn't know it was a good idea to keep your same name on a different forum, so when I got on these I used a different name for each one, I'm 1969ss on this one.

The drawing is on page 5, post 64.

http://www.camaros.net/forums/showthread.php?t=90894

Rob
__________________
"There are questions to be answered, and answers to be questioned"

Chassis, Body Jig, Trunk Pan Pics.
http://webpages.charter.net/2manitowoc

Paint booth, Ventilation, etc.
http://www.2manitowoc.com/paintroom.html

Last edited by robs ss; 10-05-2006 at 10:34 AM.
Reply With Quote