basic air line setup with drawings
Air line- compressor set up drawings
I was on another forum, the camaro forum about air lines and compressors,( body shop), (buying an air compressor, basic questions), and I noticed it has over 1600 views in 12 days, so that leads me to believe that there is a little confusion about how to run air lines. I made a couple of drawings for a basic setup that works without airdryers and all the extra hoopla that you usually see on a commercial airline setup drawing.
There is one setup going over overhead doors, and one for a basic 8 foot side wall garage, thought you might want to look at it.
Drawings are crude, but this type of layout works, anyway heres the thread.
Buying an air compressor, basic questions. ( 1 2 3 4 5 ... Last Page)
I didn't know it was a good idea to keep your same name on a different forum, so when I got on these I used a different name for each one, I'm 1969ss on this one.
The drawing is on page 5, post 64.
"There are questions to be answered, and answers to be questioned"
Chassis, Body Jig, Trunk Pan Pics.
Paint booth, Ventilation, etc.
|All times are GMT -6. The time now is 06:45 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.