Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Body - Exterior (http://www.hotrodders.com/forum/body-exterior/)
-   -   Body - Exterior, '32 Ford Roadster (http://www.hotrodders.com/forum/body-exterior-32-ford-roadster-102655.html)

dadsdream 32 11-17-2006 08:47 AM

Body - Exterior, '32 Ford Roadster
 
If there is a VERY DETAILED manual available somewhere on how to assemble a '32 Ford Roadster I and many other first time builders could sure use it. I hate this "hit & miss, trial by error" build method. For instance, what is the best method of fastening the steel firewall to my Brookville body? If I include the rubber seal between the body cowl and firewall that seems to rule out welding. What do you experienced builders recommend?

Deuce 11-17-2006 12:40 PM

I know of NO DETAILED manual ... ;)

It is a lot of trial and error ... or was for me ...
The firewall has three bolt holes on each foot ... and they need to be bolted to the chassis. There are a few bolts in the cowl area that locate the firewall ...

http://hotrodders.com/journal_photos...1431436491.jpg

http://img.photobucket.com/albums/v1...g?t=1163792375

dadsdream 32 11-21-2006 09:40 AM

Firewall to Body
 
Deuce,
Sorry for the reply delay. At my age I'm a little slow these days. Thanks for the most valued feedback with photos. That answered my question and prevented an assembly error on my part.


All times are GMT -6. The time now is 01:35 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.