Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Bringing the power steering pulley up one groove.
View Single Post
  #1 (permalink)  
Old 09-07-2012, 12:24 PM
0trbo4myCHEVUICK 0trbo4myCHEVUICK is offline
Registered User
Last photo:
Join Date: Aug 2011
Location: Fort Worth, TX
Posts: 707
Wiki Edits: 0

Thanks: 195
Thanked 16 Times in 15 Posts
Bringing the power steering pulley up one groove.

I only have two belts on my motor. One going from crank pulley, to fan/WP and alt. One going from crank to power steering.

I feel like this is bad for my water pump since i have only 1 belt making contact, I would like to move the power steering pump up one groove.

One belt going from the crank to WP/Fan to alt and one belt going from crank to WP/fan to power steering is my idea here. Can i just place spacers in between the PS bracket and the block? It needs to come out alittle over 1/2".
Reply With Quote