|
|
|
02-15-2013, 07:39 PM
|
||||
|
||||
|
Building 3.8 Buick
I have in my 1935 Ford Sedan a 1980 Buick 3.8, 30 thousands over and ported heads with four barrel, 2004R trans and 3.35 rear. Lost either a cam or lifter and plan to rebuild but I want more power with smooth driveability and fuel economy. At least 250 hp and 25 mpg. Planning on TA Performance aluminum heads but open to suggestions. Would like someone to built to my specs. but can do myself if need be. Thanks in advance
|
|
02-15-2013, 07:50 PM
|
|||||
|
|||||
|
get a used supercharged 3800 engine, pulley swap, headers, bolt it to a T5. all your goals were just met for little over a grand.
your heads will cost more than that alone.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Adaptor '37 Buick Steer wheel - '95 Buick Column? | Mutt's37Buick | Suspension - Brakes - Steering | 1 | 05-05-2012 01:58 PM |
| 1958 buick onto 1993 buick frame/floor | flatlandlowrider | General Rodding Tech | 5 | 03-27-2011 07:17 PM |
| What Ya'll Building Then ? | V8Hotrod | Hotrodders' Lounge | 17 | 07-13-2006 02:39 PM |
| Building an Engine or Building a Combination. . . | Cstraub | Engine | 3 | 10-13-2004 03:39 PM |
| Buick Century or Buick Skylark 2 | 7skylark6 | Engine | 4 | 12-26-2003 10:05 PM |
