Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - building 400 sbc
View Single Post
  #2 (permalink)  
Old 01-26-2013, 10:32 AM
cobalt327's Avatar
cobalt327 cobalt327 is offline
Last wiki edit: Intake manifold
Last journal entry: 1980 Malibu Wagon
Last photo:
Join Date: Mar 2009
Posts: 5,031
Wiki Edits: 1616

Thanks: 128
Thanked 616 Times in 565 Posts
Without knowing the dish size of the piston and the piston deck clearance (how far the piston is down the hole at TDC), there's no way to say w/any real amount of accuracy.

That said, if the dish is 24cc and the quench is 0.040", the CR will be about 9.5:1 w/stock bore and stroke and a 64cc chamber volume.
Reply With Quote