Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - building 400 sbc
View Single Post
  #5 (permalink)  
Old 01-26-2013, 03:05 PM
F-BIRD'88's Avatar
F-BIRD'88 F-BIRD'88 is offline
Yada Yada Yada
 
Last photo:
Join Date: Oct 2005
Location: Ontario, Canada
Posts: 9,550
Wiki Edits: 0

Thanks: 3
Thanked 334 Times in 331 Posts
Quote:
Originally Posted by red40chev View Post
The original pistons have a 22cc dish
just right on a 400 with a 64cc cylinder head. Will need 92 octane gas.

If you want a low rpm cruiser with 3.08 gears do not get crazy on the camshaft.

Nice set of heads. Get even nice with some hand porting.

Camshaft Isky "262 Supercam" #201262. Degree it in.. Can use 1.6 rockers.

Last edited by F-BIRD'88; 01-26-2013 at 03:10 PM.
Reply With Quote
The Following User Says Thank You to F-BIRD'88 For This Useful Post:
red40chev (01-26-2013)