Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Building a Powder Coating Oven.
Thread: Building a Powder Coating Oven.
View Single Post
  #7 (permalink)  
Old 09-02-2012, 01:11 AM
Cobra427sc's Avatar
Cobra427sc Cobra427sc is offline
Registered User
  

Last journal entry: Building a Powder Coating Oven.
Join Date: Aug 2012
Posts: 9
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by Cobra427sc View Post
Hey guy's and gal's.
I didn't know were to put this. So here is a good place then any.
I'm most probably like everyone else here, that wants his Hot Rod to look unique and, save some money in the process.
My Hot Rod just happens to be an AC Cobra kit.

So I was thinking of a way to build a powder coating oven, from the cheap end I could think of and, came up with converting an old Freezer into an PC Oven.
So if you are interested, you can follow my Photo journals in this forum. To see what I have done so far and, what will be the out come at the end of my project.

Thanks Guy's and Gal's and be Safe!
Cobra427sc.
Well the oven is coming close to being finished! So there is a light really at the end of the tunnel.
Reply With Quote