Hot Rod Forum banner

Business opportunities/franchise opportunity

940 views 1 reply 2 participants last post by  farna 
#1 · (Edited by Moderator)
#2 ·
Sounds interesting, but since I haveto have oxygen cylinders anyway, I don't think this would be a big savings excpet for someone who uses a torch a lot. Now find something that will burn as hot as oxy/acetylene (hot enough to cut 1/4" steel the same as a torch, anyway) that doesn't require a high pressure gas at all and I'll be interested. Has to cost less than a plasma cutter also, about $250-$300. I can get a decent shop use plasma cutter for $500.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top