A/C & heater lines
I mounted my A/C unit in and cut the bulk heads in the body, now I would like to use hard lines (alum) from the bulk heads to the A/C unit. I would also like to make some hard lines for the compression, what is a good hand tube bender, anyone have a recommendation, also want to make some heater hard lines which is 5/8 tube, so I will need a bender for 5/16, 1/2 and 5/8 tube.
I bought my lines from Vintage Air, and my bender from Godman($$). In retrospect, I think an inexpensive bender from Home Depot would have done as well on the aluminum lines. Bill :)
|All times are GMT -6. The time now is 01:00 AM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.