Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Cam lobe seperation
View Single Post
  #9 (permalink)  
Old 09-21-2008, 12:03 AM
ScoTFrenzel ScoTFrenzel is offline
Registered User
Last photo:
Join Date: Jun 2008
Location: USA
Posts: 1,172
Wiki Edits: 0

Thanks: 0
Thanked 2 Times in 2 Posts
Peak is peak. LSA is always given as peak to peak.

When cams are ground with say +4* advance, both the intake and exhaust lobes are ground with that 4* advance.
In simple terms = the whole cam is advanced, not just the intake lobes.
All they are doing is moving the cam "keyway/dowell" so the entire cam is advanced.
Reply With Quote