Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Cam selection... 383 chevy, vortechs, heavy car...streetable but fun. 400hp-ish
View Single Post
  #17 (permalink)  
Old 12-04-2012, 04:21 PM
Motochris's Avatar
Motochris Motochris is offline
Registered User
 
Last photo:
Join Date: Jul 2007
Location: Ridgecrest CA
Posts: 101
Wiki Edits: 0

Thanks: 0
Thanked 4 Times in 2 Posts
Quote:
Originally Posted by hcompton View Post
Not sure how you can say that edelbrock is the one company out there that really stands behind there product. They sell the highest quaility hop up parts on the market. Yes they focus on middle of the road performance. But that hardly means its junk. Really means its what this car needs.

With this car i would go for 300-350 ft tq. Hp is not going to matter much and may even slow the car down if the cam is to peaky. I got my 4000 pound 71 gp from a guy that had tried 10 cams and finally went with a smaller pmd cam factory cam. That made the car run the fastest at the track. The op can save himself the issues of replacing several cams to find something that works he could just get the performer or the torker. Edelbrock provides thecombos that work for little money and big results that act as expected.

The 59 wagon has to be every bit of 5000 lbs. Does it have an X frame? Might want to be easy on it with older frame. 400hp and the tq that comes with it is a lot of pressure to put on the old style frame. It will be fine with street tires and normal fun run type of driving. Some slicks and some abuse at the race track could lead to some major issues. Best to let it spin if you get a lot more power than stock. Especially if it has stock suspension and brakes.
This car will NEVER see slicks.
It's in the parking lot here at work right now. It's my daily driver, I just want it to be fun. If it doesn't have 400hp... that's OK, I just had to make a target somewhere. I want it to run good, be a hotrod. The current setup has all the parts listed in my first post in a 350 with a very mild cam...it needs more oomph....
Attached Thumbnails
Click image for larger version

Name:	005.JPG
Views:	60
Size:	792.4 KB
ID:	69585   Click image for larger version

Name:	008 (2).JPG
Views:	69
Size:	694.0 KB
ID:	69586  
Reply With Quote