Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Cam for a Vortec 355
View Single Post
  #23 (permalink)  
Old 10-16-2012, 10:56 PM
F-BIRD'88's Avatar
F-BIRD'88 F-BIRD'88 is offline
Yada Yada Yada
Last photo:
Join Date: Oct 2005
Location: Ontario, Canada
Posts: 9,210
Wiki Edits: 0

Thanks: 5
Thanked 388 Times in 382 Posts
Xe274H-10 needs 4.10's for that car.

Xe274 or 12-672-4 cs nostalgia 30-30h+ or Isky 278 mega cam
All these cams will need 4.10's. a 3500 stall is best with all a these.

3.55:1 use a smaller cam .

12-672-4 This cam will be particilarly lame with just 3.55's.
Needs a 3500++4000 stall and 4.30-4.56

You must fully port a vortec heads to see the benefit of a large than stock valve.
Larger valves and full porting will work well.
Reply With Quote