|
|
|
10-16-2002, 10:47 AM
|
||||
|
||||
camel hump heads
I just bought a set of camel humps and a weind tunnel ram w/ 2 holley 450's for my 350. The guy I bought them from told me that I wouldn't have to change the springs or lifters when I install the matching cam for the tunnel ram. Is this right? What would happen if he was wrong? What are the best applications for these heads?
[ October 16, 2002: Message edited by: servant70131 ]</p> 
|
|
10-16-2002, 12:27 PM
|
||||||
|
||||||
|
The springs have nothing to do with the tunnel ram, but they must be correct for the cam. To tight of springs and the valves wont open N close right. Just figure the cam you want, then have your springs checked to make sure there the right ones. HG
|
|
10-17-2002, 03:19 AM
|
||||||
|
||||||
|
What he said!!!
Slider in Wa.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
