Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Hotrodding Basics (http://www.hotrodders.com/forum/hotrodding-basics/)
-   -   camshaft (http://www.hotrodders.com/forum/camshaft-181608.html)

malvernbay 07-25-2010 09:33 AM

camshaft
 
i have a chet herbert .555 .555 solid or hyd. billet roller, i have forgotten what to adjust for solid lifters, anyone have any idea, i have them adjusted at 10 intake 12 exhaust, i think they are to tight, was thinking more of .16 .18 or maybe .20 .22, any help will be greatly appreciated

oldBodyman 07-25-2010 10:09 AM

1 Attachment(s)
Google is your friend:

Chet Herbert thread

Doug Herbert racing

or call the guy who ground it, Don Johansen

malvernbay 07-25-2010 08:39 PM

camshaft
 
thanks for the info on who ground the cam, i didnt know that, ran herbert cams for years. i googled the cam and it shows the specs but no valve lash, going to call tomorrow, thanks again for the info, malvernbay


All times are GMT -6. The time now is 05:59 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.