Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - CamShaft Advise
Thread: CamShaft Advise
View Single Post
  #1 (permalink)  
Old 03-21-2014, 10:27 PM
TGBTG7701 TGBTG7701 is offline
Registered User
 
Join Date: Oct 2013
Posts: 32
Wiki Edits: 0

Thanks: 1
Thanked 1 Time in 1 Post
CamShaft Advise

I hoping someone could recommend a camshaft for the engine I am putting together once again. I am building a 350 Chevy 0.060 over, 190/72cc heads, 2.02 x 1.60 64cc chamber. With the pistons I am using I should see around 9.8 10.1 compression. The motor most likely will not see over 6k RPMs. The engine is going in my 1986 El Camino, TH350 transmission 2000 stall, 373 gears. I want something I can take out on the weekends not to radical, still have decent street manors.
Reply With Quote