Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - camshafts for sbc (302,305,307,327)
View Single Post
  #22 (permalink)  
Old 03-21-2012, 09:22 PM
blackpanther68's Avatar
blackpanther68 blackpanther68 is offline
Registered User
 
Last photo:
Join Date: Dec 2011
Posts: 35
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by F-BIRD'88
Here is a bit tamer version of this basic 307 w ported 416 heads build.
Uses a 10" 3500 stall and 4.10 to 4.56 gears.
Use Lunati street performance solid lifter cam # 401A3LUN
272-282 238-248 .485 .503 112LSA Use lunati 73943 @1.70"

just a little tamer but still a barrel of fun.
Shift it around 6700 rpm or so.

www.lunaticams.com
Ditch the powerglide trans. Its going to be lame behind a 307.
Get a th350 and 10" 3500 high stall.
so the .485/.503 wont b 2 big of a cam. the other member was saying if its over a certain amount the valves will hit etc. and will 3.73 gears b okay?

i kno nothing and i mean nothing about this stall converter thing. i know nothing about what it is or does??
Reply With Quote