Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - camshafts for sbc (302,305,307,327)
View Single Post
  #25 (permalink)  
Old 03-21-2012, 09:34 PM
Dannyringo Dannyringo is offline
Registered User
Last photo:
Join Date: Feb 2012
Posts: 120
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Originally Posted by blackpanther68
so the .485/.503 wont b 2 big of a cam. the other member was saying if its over a certain amount the valves will hit etc. and will 3.73 gears b okay?

i kno nothing and i mean nothing about this stall converter thing. i know nothing about what it is or does??
Over cammed for the heads~! .450/460 is max for those heads...Trust me...Unless your going with the old fuelie heads (461/462) and even with those heads max lift for best results is .500 lift...The 305 heads have too small of ports for that big of a cam....Parts mismatched give headaches, not fun from stop light to stoplight....That is what your looking for...Now if they were Vortec heads, go for that high of a cam...But those heads, not me...waste of money on the cam you have fuel puddling at the bottom of the intake...not good~!
Reply With Quote