Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Hotrodding Basics (http://www.hotrodders.com/forum/hotrodding-basics/)
-   -   can I get a dynosim? (http://www.hotrodders.com/forum/can-i-get-dynosim-202269.html)

dusty13 07-19-2011 03:03 PM

can I get a dynosim?
 
I've searched for some dynosims similar to mine, but none exact. tech, if you don't mind to run one for me here are my specs:

chevy 360

4.060 x 3.48

stock (except springs) vortec 906 casting heads. 1.94/1.5 64cc

rockers: 1.6 roller tip

pistons: flat top hypers, 4 VR, -5cc (I think) 1.560 height, .025 clearance

head gaskets: felpro 7733PT2, .039 comp thick

intake: RPM Air gap

carb: holley 750 dp

cam: Crane 10005, flat hyd, specs: http://www.cranecams.com/product/car...detail&p=23943 1.6 rocker ratio

headers: 1 5/8 shorty (sticking with shorties for now, its going in a 3rd gen camaro and I can use my stock y-pipe, etc.)

fuel: 91 oct unleaded

if I'm forgetting anything let me know. thanks!!

454C10 07-19-2011 07:01 PM

i would say around 350hp

dusty13 07-22-2011 08:05 AM

buuummpp, anyone?

malc 07-22-2011 11:04 AM

This is as near as I could get, no Vortecs or Airgap listed in the programme.

http://www.hotrodders.com/gallery/da...Dynosim_II.jpg


Large version, click here.



Let me know if anything needs tweaking.

Pretty similar to mine.


All times are GMT -6. The time now is 03:50 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.