Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - cant get the ac working after engine install
View Single Post
  #3 (permalink)  
Old 09-01-2012, 02:53 PM
briansansone's Avatar
briansansone briansansone is offline
4 chevys and a ford
Last photo:
Join Date: Sep 2004
Location: atlanta ga
Posts: 434
Wiki Edits: 0

Thanks: 17
Thanked 3 Times in 3 Posts
yes the pressures are at idle speed.
125 psi with the engine off and the system equalized.
I replaced the accumulator.

The system calls for 68 oz. I have about 60 in there, and there is no change in temp. Its a van with rear ac.

The line just after the orifice tube at the evap inlet is freezing. but at the evap outlet it is super hot.
Reply With Quote