Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Car shakes in rear?
View Single Post
  #25 (permalink)  
Old 01-29-2013, 10:05 AM
Blown496 Blown496 is offline
Registered User
Last photo:
Join Date: Jul 2011
Location: Wentzville,MO
Posts: 190
Wiki Edits: 0

Thanks: 0
Thanked 2 Times in 2 Posts
Look up that Hunter equipment or use the locator page and call one of them. They are very popular in the tire world. The machine uses a roller to simulate the tire on the ground under load. One of my tires had to be rotated to balance the heavy spots. I replaced the tires, yoke, all the bearings, new housing, new drums, new drive shaft and jacked the pinion angle up and down 1/2 degree at a time from 3 up to 3 down and the vib was always the same. I did runouts on wheels and axles and drive shaft and all was okay. I spent a lot of time and money before this $24 fix. I would guess that one of the Weld wheels is heavy on one side and the 29x18 wide Mickey radials don't help.
Reply With Quote