Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - carb advice
Thread: carb advice
View Single Post
  #17 (permalink)  
Old 03-28-2010, 07:01 PM
Bill-E-BoB's Avatar
Bill-E-BoB Bill-E-BoB is offline
Registered User

Last journal entry: A years worth of catching up
Last photo:
Join Date: May 2006
Location: Woodstock, GA
Age: 34
Posts: 129
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
hey guys, hate to revive an old post but I figured it made more sense than starting a new one up...that carb from ebay came in the mail & it looks like everything should be good but I have a question on installing it...

Vacuum lines...with the old Carter carb, the distributor vac advance connected to a small port on the front of the carb, the PCV connected to a big port on the front, and the brake booster connected to a big port on the back. The Holley doesn't have the same vacuum ports though. Just a small vacuum port down by the mounting flange, a small port on the front bowl & a big port by the rear what goes where?
Reply With Quote