Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Carb spacers do work
View Single Post
  #4 (permalink)  
Old 11-16-2012, 06:39 PM
Nemeth's Avatar
Nemeth Nemeth is offline
My 327 Cruiser
Join Date: Nov 2012
Location: Riverside California
Age: 49
Posts: 25
Wiki Edits: 0

Thanks: 4
Thanked 1 Time in 1 Post
Carb spacers

Well I got so many different answers that I went and bit the bullet and bought several sizes of 4 hole and opens.... Funny the guy at the speed shop told me an open spacer would kill my torque all around....wrong made the bottom a little softer but between 2600 to 6000 I gained a whole lot more seat of the pants pull made me much happier with my build!!!! Was starting to think 383 was a bad choice but know my mind is changing...

Well lets see wat an open hole 1.5 spacer dose.Also I think my dissy advance springs are to tight cause It advances kinda slow when throttle is snapped. Ill try a curve kit and hope nothins wrong with my HEI.

Got to read and experiment first.....before questions are asked and to many wrong answers are given!!!!
Reply With Quote