Centering a Ford 9"?

**Deuce** · #16 (**permalink**) 11-15-2005, 07:16 AM

I am doing a new 32 chassis.......for my 3W

here is the 9 inch in it.........the center is 'centered' from the rear view.....but the pinion is not......

techinspector1 · #17 (**permalink**) 11-18-2005, 07:57 PM

Quote:

Originally Posted by woundbroom

If you check a Mustang you will see that the rear is off from the factory. The engine is offset to one side and the rear is too. Works O.K.

Bingo. The OEM installations I've checked had the motor positioned to the passenger side of the car slightly. Measure from the inner fenders on each side of the car to the middle of the motor and you'll see it.

Triaged · #18 (**permalink**) 11-19-2005, 12:22 AM

Quote:

Originally Posted by luckyscustomcreation

Moser makes a nine inch housing that centers them both. pinion and housing. give em a call and he can make to any length desired.

How would they do that

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Explorer Disc Bbrakes on a 9" Ford Rear End	Mustangsaly	Suspension - Brakes - Steering	2	10-31-2005 04:18 PM
Wanna Talk Cars "Fords"	66Falcon	Hotrodders' Lounge	17	10-01-2005 05:29 AM
Ford 9" in a Mopar	Dale Palmer	Transmission - Rearend	1	02-25-2004 10:12 AM
Whatever happend to these guys?	hot_rod_kid	Hotrodders' Lounge	20	12-17-2002 09:20 AM
9" ford rearend 37 ford	melbishop	Transmission - Rearend	3	12-09-2001 09:15 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)