chevrolet 327/350 starting trouble
Hi out there,
I have a jeep cj7 with a 68 Chevrolet 327/350 engine (HEI)
Recently i swapped the original Quadrajet carb & manifold for a Edelbrock performer manifold & carb.
After mounting the edelbrock parts & setting the ignition in the global position(as before), turning the ignition key,the engine runs good!!!
I decided to drive the Jeep home,and to set the timing later with the proper tools!!!
At the traffic lights the engine stopped running , i restarted the engine and drove home.
The next day ,driving to my work , the same trouble,only this time i was not able to restart the engine!!!
Please advise me ,How to locate the trouble (Trouble shooting check list )
Thanks for your time,
|All times are GMT -6. The time now is 02:36 PM.|
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.