Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Chevy 383 Roller Build (cont.....)
Thread: Chevy 383 Roller Build (cont.....)
View Single Post
  #64 (permalink)  
Old 02-03-2013, 04:32 PM
ChevroletSS ChevroletSS is offline
Registered User
  
Last photo:
Join Date: Nov 2012
Age: 27
Posts: 168
Wiki Edits: 0

Thanks: 6
Thanked 0 Times in 0 Posts
well I need to order my rotating assembly before I can do all that. I dont know the piston to deck clearence But need to know if the +12 cc or + 5 cc, or a +7 cc dished pistons will give me a CR between 9.5:1 and 11:1 without knowing that off hand. Im sure I can get my compression in between that mark with one of these three pistons.

Thanks guys for the input Im new to the PERFORMANCE side of engine building so bare with me please.
Last edited by ChevroletSS; 02-03-2013 at 04:43 PM.
Reply With Quote