Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Chevy C6500 truck with 454 engine install distributor with cam sensor
View Single Post
  #6 (permalink)  
Old 01-22-2012, 06:14 PM
LATECH's Avatar
LATECH LATECH is offline Moderator

Last journal entry: GTO Reproduction Hood
Last photo:
Join Date: Jul 2010
Location: Northeast Pennsylvania
Posts: 6,999
Wiki Edits: 0

Thanks: 437
Thanked 632 Times in 549 Posts
No. Put the rotor at the little number 8 on the dizzy housing. Dont pay any attention to the firing order.Be sure when it is tightened down the rotor points at that little number 8. The 8 is to reference the dizzy as used in the 8 cylinder. Some of those dizzys had a 6 and an 8, and could be used in either a 6 or 8 cylinder, and were marked for reference accordingly.
Reply With Quote