Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Chevy Truck problems
View Single Post
  #3 (permalink)  
Old 06-20-2012, 05:27 PM
S10 Racer's Avatar
S10 Racer S10 Racer is offline
http://www.warsprints.com
 

Last journal entry: W.A.R. (Wingless Auto Racing) Sprint Car Racing
Last photo:
Join Date: Nov 2007
Location: At The Dirt Tracks
Age: 55
Posts: 1,881
Wiki Edits: 0

Thanks: 3
Thanked 59 Times in 54 Posts
Quote:
Originally Posted by spinn
This is a driver truck it should have been fine. A little clip took out the head? Come on, how big was it? Ever take a salvage car and throw pennies into the intake? Drowning it with water will bend the rods.

I have dropped washers nuts screws into the engine. Did nothing but maybe increase the compression ratio by taking up space.

Not a common practice of mine.
I actually tore down an engine for a refresh and found a needle from a carb was embedded in the top of one piston. Not sure where it came from but the engine still ran good, just used a little oil.
Reply With Quote