Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Body - Exterior (http://www.hotrodders.com/forum/body-exterior/)
-   -   Clearing AE with Universal urethaine clear (http://www.hotrodders.com/forum/clearing-ae-universal-urethaine-clear-141972.html)

AllanWms 07-14-2008 11:09 AM

Clearing AE with Universal urethaine clear
 
I just finished wet sanding my previous AE (dust and a few insects). I will be reshooting the AE.

1. How long do I should I wait to shoot the urethaine clear?
2. How long would I need to wait to wetsand and polish the clear?

thanks
Allan

chevy321 07-14-2008 08:45 PM

ae
 
shoot clear as if it was your next color coat, same flash time. but be sure to read your can instructions or get data sheet. i dont know what brand u r using. i would let it get just about dry to the touch but still a little sticky not stringy just enuf 2 leave finger print. u want to be able 2 lightly drag your finger across paint without pulling or ripping.do it on taped area not pannel. wet sand & buff next day. but get that data sheet your ae could tell u different

jcclark 07-15-2008 05:42 AM

I was told by a good source that it's better to wait overnight when
clearing single stage colors.
Single stage colors off gass a long time.
When I cleared my car, that I used a metallic urethane on,
I found if I didn't wait a good 3 hrs, sometimes the metallic would
be disturbed by the clear and make the color look different,
looking like stripes.
Waiting longer, up to 24 hrs is best. :pimp:


All times are GMT -6. The time now is 11:06 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.