Hot Rod Forum banner

Coilover question

783 views 3 replies 3 participants last post by  Minor Problem 
#1 ·
If I install a set of coilovers at a 20 deg.angle on a 4 link setup,will there be and adverse problems.I'm building a Morris Minor with a tube chassis and there's just not enough room to put them straight up. :confused:

Thanks...Frank
 
#3 ·
20* is a common angle, you just need to factor in the angle when you pick your spring rate, a 20* angle equates to a 12% reduction in spring rate.

Chech the spiffy chart that Speedway motors has in their catalog.



Later, mikey
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top